Krix MX-20 Mk2 modular cinema speaker
Krix

MX-20 Mk2

Krix MX-20 Mk2 Modular Cinema Speaker

$POA
Available
High-output modular LCR platformDesigned for dedicated behind-screen installationsPairs with MX sub module ecosystemSupports Krix/LEA amplifier matrix workflows

High-output modular behind-screen cinema speaker for dedicated home theatres.

Overview

The Krix MX-20 Mk2 is a high-output modular behind-screen cinema speaker engineered for dedicated theatres that require meaningful dynamic headroom while maintaining tonal consistency across LCR channels. It is designed to pair with the Krix MX sub module ecosystem and dedicated amplifier paths for full-system integration.

Pros & Cons

Strengths

  • Strong output and dynamic headroom
  • Seamless integration within Krix MX systems
  • Purpose-built for dedicated cinema rooms

Limitations

  • Requires dedicated installation depth and planning
  • Requires external amplification
Technical Details

Full Specifications

System Recommendations

Recommended Room Depth4m - 10m
Minimum Screen Size (16:9)115" (2546mm x 1432mm)
Minimum Screen Size (21:9)110" (2569mm x 1101mm)

LCR Speaker Modules

Frequency Range40Hz - 20kHz in-room response
Power Handling100 - 700 Watts RMS recommended amplifier power
Sensitivity98dB for 2.83V at 1 metre
Impedance8 Ohms
Configuration2-way
Enclosure TypeBass reflex, front vented
Low Frequency DriverSingle 305mm (12") paper cone driver with 75mm (3") voice coil
High Frequency Driver26mm (1") doped fabric dome with Krix 90 x 40 short throw waveguide
Input TerminalsGold plated spring terminals
Dimensions1015mm H x 430mm W x 270mm D (2720mm wide including subwoofer modules)
Weight25kg each

Subwoofer Modules

Frequency Range25Hz - 200Hz in-room response
Power Handling200 - 1400 Watts RMS recommended amplifier power
Recommended ProcessingHigh pass filter: 25Hz 24dB/Octave Butterworth; Limiter: 1000W (8 Ohms)
Sensitivity98dB for 2.83V at 1 metre
Impedance8 Ohms
Enclosure TypeBass reflex, front vented
Low Frequency DriverSingle 380mm (15") paper cone driver with 100mm (4") voice coil
Input TerminalsHigh level gold plated spring terminals
Dimensions1015mm H x 550mm W x 270mm D (2720mm wide including LCR modules)
Weight35kg each
Kolosseum Design Perspective

MX-20 Mk2 Integration Guidance

At Kolosseum, MX-20 Mk2 is specified where a high-output modular LCR is required with discrete amplifier planning. We pair it with MX sub modules and amplifier matrix validation to ensure correct channel power and routing.

Room Requirements

Dedicated cinema room with behind-screen depth and baffle wall planning.

Recommended Screen Pairing

Best paired with acoustically transparent projection screens.

Acoustic Considerations

Front-stage treatment and calibrated crossover integration are recommended.

Common Questions

Frequently Asked Questions About the Krix MX-20 Mk2 Modular Cinema Speaker.

No, MX-20 Mk2 is listed as POA and priced as part of a complete cinema design scope.

Use the official MX-20 Mk2 product page, specification sheet, and MX20/MX30/MX40 installation manual for detailed planning and setup.

Similar Products

Compare Alternative Speakers.

Krix

MX-20 Sub

Passive Krix MX-20 Sub module for high-output dedicated cinema bass with MX modular LCR systems.

Krix

KA-1100

Krix KA-1100 is a dual-mono Class D subwoofer amplifier with three pre-configured DSP modes optimised for Krix passive subwoofers. Delivers up to 700W RMS per channel at 4Ω with fan-less operation, 12V trigger, and balanced/unbalanced inputs. Designed and engineered in Australia since 1974.

View Details →
Krix

MX-30

Krix MX-30 modular behind-screen cinema speaker designed for large dedicated theatres with reference cinema output.

View Details →
Krix

LX-7 Linear LCR

Krix LX-7 wide-format single-chassis LCR soundbar for behind-screen cinema delivery where discrete speaker placement is constrained.

View Details →
Krix

Megacyclonix

Flagship dual-18-inch passive Krix Megacyclonix cinema subwoofer for very low frequency extension and maximum output.

Ready to Design Your Cinema Around the MX-20 Mk2?

Kolosseum is an independent design consultancy, not a retailer. We design the complete cinema experience and connect you with authorized dealers for purchase and professional installation.

Tell us about your room, your budget, and your vision. We will create a complete cinema design that integrates the Krix MX-20 Mk2 Modular Cinema Speaker with the right screen, speakers, acoustics, and seating.