Ascendo THE12 Passive On Wall speaker front view
Ascendo THE12 Passive On Wall speaker angled view
Ascendo logo

THE12 Passive On Wall

Ascendo THE12 Passive On Wall Speaker

$0 AUD
Available
12" point-source coaxial driver121 dB continuous / 133 dB peak SPL99 dB sensitivity85° x 85° controlled directivity600W power handlingTop of the ASCENDO passive on-wall range

12" coaxial passive on-wall speaker with 121 dB continuous SPL, 99 dB sensitivity, and 600W power handling. The top of the ASCENDO passive on-wall range for large-format private cinema LCR.

Released 2024-01Manufacturer warranty (region dependent)

Overview

The ASCENDO THE12 Passive On Wall is the flagship of the passive on-wall speaker range, built around a 12" time-coherent point-source coaxial driver in a vented passive enclosure. With 99 dB sensitivity at 1W/1m and 121 dB continuous / 133 dB peak SPL, the THE12 delivers reference-grade output for large private cinema rooms without requiring active electronics at the speaker position. The 8Ω nominal impedance and 600W power handling are compatible with high-performance passive multichannel amplifier platforms. Frequency range is 95 Hz to 20 kHz (-3 dB), and the controlled 85°×85° directivity pattern is consistent with THE6 and THE10, allowing mixed-size LCR and surround arrays with predictable timbre. At 390×615×175mm and 22.0 kg, the THE12 is a large-format enclosure suited to substantial LCR positions in dedicated cinema rooms.

Resources

Downloads & Documentation

Pros & Cons

Strengths

  • 99 dB sensitivity — delivers extremely high SPL with moderate amplifier power
  • 133 dB peak SPL for the most demanding dynamic cinema content
  • Consistent 85° directivity with THE6 and THE10 enables matched full-range mixed-size arrays
  • Passive design integrates with any quality multichannel amplifier platform
  • Coaxial point-source delivers excellent imaging in large cinema rooms

Limitations

  • At 22 kg, requires heavy-duty structural wall fixings
  • Large enclosure format — requires planning for screen and mounting depth
  • 95 Hz lower limit requires dedicated subwoofer support
Technical Details

Full Specifications

Transducer

Driver12" time-coherent point-source coaxial
EnclosureVented, passive

Performance

SPL (Continuous)121 dB
SPL (Peak)133 dB
Frequency Range95 Hz – 20 kHz (-3 dB)
Sensitivity99 dB / 1W / 1m
Directivity85° x 85°

Electrical

Power Handling600W
Nominal Impedance

Physical

Dimensions (H×W×D)390 x 615 x 175 mm
Weight22.0 kg
Kolosseum Design Perspective

Integrating the Ascendo THE12 Passive On Wall as Reference LCR

Kolosseum specifies the THE12 Passive On Wall as a primary LCR in large-format dedicated cinema rooms where passive operation is preferred over active. Its exceptional sensitivity and output capability allow it to reach reference SPL levels with quality amplification, without the complexity of active electronics at the speaker position.

Room Requirements

The THE12 is suited to large cinema rooms from 60 m² upward. Structural planning is essential given its 22 kg weight. Subwoofer integration below 95 Hz is mandatory.

Recommended Screen Pairing

Designed for placement behind acoustically transparent screens. Its large enclosure depth should be accounted for in screen wall and riser design.

Acoustic Considerations

The coaxial driver and 85° controlled coverage simplify treatment design. We measure and verify coverage, imaging, and tonal balance during commissioning using professional calibration tools.

Common Questions

Frequently Asked Questions About the Ascendo THE12 Passive On Wall Speaker.

Yes. The 12" driver delivers 2 dB more sensitivity (99 vs 97 dB) and 3 dB more continuous SPL. In large rooms this translates to considerably more headroom at reference listening levels.

Yes. Its 95 Hz lower limit means a dedicated subwoofer is required for bass frequencies in any full-range cinema system.

Yes. All three share the same 85°×85° directivity pattern from the coaxial driver design, which enables consistent timbre matching when mixing sizes across LCR and surround positions.

Fixing into masonry or structural framing with appropriate-rated wall anchors and speaker-rated brackets is required. Kolosseum plans mounting hardware as part of the design and installation process.

Similar Products

Compare Alternative Speakers.

Ascendo

THE10 Passive On Wall

ASCENDO 10" point-source coaxial passive on-wall speaker. 97dB sensitivity, 120/130 dB SPL, 85°×85° dispersion. Excellent for LCR and large surround positions.

View Details →
Ascendo

THE HALO 10 PRO Active Ext Cardioid

ASCENDO flagship active cardioid screen speaker with 6x 8" cardioid woofer array, 10" coaxial point-source midrange, and 136+ dB SPL. The ultimate disappearing cinema speaker.

View Details →
Ascendo

THE32 Sub Pro Active Sealed

ASCENDO world-record 32" infrasonic subwoofer. 6,000W active, 90mm linear travel, 140 dB @ 32Hz. Displaces air equivalent to fifteen standard 18" subs.

View Details →

Ready to Design Your Cinema Around the THE12 Passive On Wall?

Kolosseum is an independent design consultancy, not a retailer. We design the complete cinema experience and connect you with authorized dealers for purchase and professional installation.

Tell us about your room, your budget, and your vision. We will create a complete cinema design that integrates the Ascendo THE12 Passive On Wall Speaker with the right screen, speakers, acoustics, and seating.