Krix MX-10
Krix

MX-10

Krix MX-10 Modular Cinema Speaker

$POA
Available
Medium modular LCRDedicated cinema front-stage useMX ecosystem integration

Modular behind-screen cinema speaker for medium dedicated theatres.

Overview

The Krix MX-10 is a medium-format modular LCR speaker designed for dedicated cinemas requiring robust dynamics and consistent front-stage tonality.

Pros & Cons

Strengths

  • Strong dynamics for medium rooms
  • Tonal consistency with MX series

Limitations

  • Requires external amplification
  • POA pricing
Technical Details

Full Specifications

System Recommendations

Minimum Screen Size (16:9)95" (2103mm x 1183mm)
Minimum Screen Size (21:9)100" (2335mm x 1001mm)

LCR Speaker Modules

Frequency Range40Hz - 20kHz in-room response
Power Handling100 - 500 Watts RMS recommended amplifier power
Sensitivity97dB for 2.83V at 1 metre
Impedance8 Ohms
Configuration2-way
Enclosure TypeBass reflex, front vented
Low Frequency DriverSingle 255mm (10") paper cone driver with 50mm (2") voice coil
High Frequency Driver26mm (1") doped fabric dome with Krix 90 x 40 short throw waveguide
Input TerminalsNickel plated spring terminals featuring a 5mm hole for up to 10AWG cable
Dimensions940mm H x 315mm W x 205mm D (2040mm wide including subwoofer modules)
Weight15kg each

Subwoofer Modules

Frequency Range25Hz - 200Hz in-room response
Power Handling200 - 500 Watts RMS recommended amplifier power
Recommended ProcessingHigh pass filter: 30Hz 24dB/Octave Butterworth; Limiter: 500W (4 Ohms)
Sensitivity92dB for 2.83V at 1 metre
Impedance4 Ohms
Enclosure TypeBass reflex, down-firing vents
Low Frequency Driver305mm (12") paper cone driver with 50mm (2") long throw voice coil
Input TerminalsHigh level gold plated spring terminals
Dimensions940mm H x 540mm W x 205mm D (2025mm wide including LCR modules)
Weight26kg each
Kolosseum Design Perspective

MX-10 Integration

Used where medium-scale modular front-stage output is required.

Room Requirements

Dedicated room with behind-screen placement.

Recommended Screen Pairing

AT screen preferred.

Acoustic Considerations

Front-stage acoustic treatment and calibration recommended.

Common Questions

Frequently Asked Questions About the Krix MX-10 Modular Cinema Speaker.

No. MX-10 is POA and quoted as part of a full design scope.

Similar Products

Compare Alternative Speakers.

Krix

MX-10 Sub

Passive Krix MX-10 Sub module designed to pair with MX modular LCR systems in medium-sized dedicated cinemas.

Krix

KA-1100

Krix KA-1100 is a dual-mono Class D subwoofer amplifier with three pre-configured DSP modes optimised for Krix passive subwoofers. Delivers up to 700W RMS per channel at 4Ω with fan-less operation, 12V trigger, and balanced/unbalanced inputs. Designed and engineered in Australia since 1974.

View Details →
Krix

MX-20 Mk2

Krix MX-20 Mk2 modular behind-screen cinema speaker for larger dedicated theatres requiring higher output.

View Details →
Krix

MX-30

Krix MX-30 modular behind-screen cinema speaker designed for large dedicated theatres with reference cinema output.

View Details →
Krix

LX-7 Linear LCR

Krix LX-7 wide-format single-chassis LCR soundbar for behind-screen cinema delivery where discrete speaker placement is constrained.

View Details →

Ready to Design Your Cinema Around the MX-10?

Kolosseum is an independent design consultancy, not a retailer. We design the complete cinema experience and connect you with authorized dealers for purchase and professional installation.

Tell us about your room, your budget, and your vision. We will create a complete cinema design that integrates the Krix MX-10 Modular Cinema Speaker with the right screen, speakers, acoustics, and seating.